Skip to product information
1 of 10

3D Popup Tower Display

3D Popup Tower Display

  • Four-Sided Fabric Graphic
  • 3ft or 4ft Square Footprint
  • 8ft or 10ft Height
  • Pillowcase Graphic with Zipper
  • Snap-Together Aluminum Tubes
  • Optional LED Backlighting
Replacement Guarantee
Replacement Guarantee
any Print/Hwd Issue
Delivery Guarantee
Delivery Guarantee
before your Event
Free Designing and Proofing
Free Designing & Proofing
before Production
Trusted by Exhibitors
Trusted by 250+ exhibitors
across USA
Need us to Design for you? Send us your logo and requirements along with your Order Number to hello@printdrill.com

View full details

Four Sides of Branding Instead of One Backdrop

A traditional banner is designed to be seen from the front. The 3D Popup Tower Display is different. Its square, freestanding structure provides four printed faces, making it useful in spaces where people approach from several directions.

Position it between exhibition booths, at the entrance to a conference, or in an open retail area. Instead of turning a banner toward one aisle, you can display your logo, product imagery, or event information on all four sides.

Available in 3ft × 3ft and 4ft × 4ft footprints, with heights of 8ft or 10ft, the tower creates a tall branding surface without requiring a wide backdrop wall.

The frame uses 32mm aluminum tubes with matching labels and push-button connectors. A custom-printed 240g flame-retardant tension fabric sleeve fits over the structure and zips closed at the bottom, creating a continuous graphic around the tower.

For venues where illuminated branding is useful, you can select the optional LED backlighting system. Its internal 5000K white lights illuminate the fabric from within, making the tower a lit promotional display.

The frame can be dismantled and packed into carrying bags for transportation and reuse.

Which Size Should You Choose?

Size Floor Footprint Best Reason to Choose It
3 × 8 ft 3ft × 3ft Compact branding for smaller event spaces with an 8ft height allowance.
3 × 10 ft 3ft × 3ft Taller, narrow branding in venues that permit 10ft displays.
4 × 8 ft 4ft × 4ft Larger printed faces for product imagery and more readable messaging.
4 × 10 ft 4ft × 4ft Maximum graphic presence in this range for large, high-ceiling venues.

Our recommendation: Start by selecting the height permitted by your event, then choose the footprint.

If you're primarily displaying a logo and a short message, the 3ft-wide tower may be sufficient. Choose 4ft when you need larger graphics, sponsor logos, or information that should be readable from farther away.

Important: Many standard inline trade show booths have an 8ft display-height limit and restrict the placement of tall structures near the aisle. A 10ft tower is better suited to approved island, perimeter, or high-ceiling event spaces. Always check your exhibitor manual.

Why Choose a 3D Popup Tower?

  • Useful in Open Spaces Place the tower where visitors can approach from several directions, rather than against a wall
  • Different Messages on Different Faces One side can feature your logo, another your products, and the remaining sides event information or promotional artwork
  • Small Floor Footprint The 3ft model occupies a nominal 3ft × 3ft floor area, making it useful when you need height but have limited room
  • Optional Illuminated Graphics Add LED lighting when you want the printed tower to stand out in an indoor space with subdued lighting

Key Features & Practical Uses

  • Four-Sided Fabric Graphic Branding visible from all four directions, subject to placement and obstructions
  • 3ft or 4ft Square Footprint Choose how much floor area the display can occupy
  • 8ft or 10ft Height Match the display to your venue's height allowance
  • Pillowcase Graphic with Zipper A fitted graphic wraps around the frame instead of using four separate banners
  • Snap-Together Aluminum Tubes Numbered, push-button connections simplify assembly
  • Optional LED Backlighting Illuminates the printed fabric from inside the tower

Display Specifications

Specification Details
Available Sizes 3×8ft, 3×10ft, 4×8ft, 4×10ft
Display Structure Four-Sided Square Tower
Graphic Material 240g Flame-Retardant Tension Fabric
Frame Material Aluminum
Printing Full-Color Dye Sublimation
Fabric Layer Single
Tube Diameter 32mm (1.26")
Tube Wall Thickness 1mm (0.04")
Graphic Installation Pillowcase Sleeve with Bottom Zipper
Assembly Labeled Tubes with Push-Button Connections
Lighting Optional LED Backlighting

Frame & Graphic Dimensions

Size Assembled Frame (W × D × H) Graphic Size
3×8ft 36" × 36" × 96" 144" × 97"
3×10ft 36" × 36" × 118" 144" × 119"
4×8ft 48" × 48" × 96" 192" × 97"
4×10ft 48" × 48" × 118" 192" × 131"

Artwork dimensions: The graphic dimensions are flat artwork measurements for the wraparound fabric. Use the product's size-specific design template when preparing files.

Optional LED Lighting Specifications

The following LED system is specified for all four available sizes.

Specification Details
LED Strips 4 × 35.43"
LED Support Bars 4
Support Bar Length 36" for 3ft models; 48" for 4ft models
LED Beads 60 Total (15 per strip)
Color Temperature 5000K White
Theoretical Brightness 18,000 Lumens
LED System Power 180W
Operating Voltage 24V DC
Power Adapter 264W Rated Output
Adapter Quantity 1
DC Cable 118.11", 1
Adapter UL File No. E321192
LED Bead UL File No. E539346

The 18,000-lumen figure describes theoretical LED output, not the measured light passing through the printed fabric.

Frequently Asked Questions

Q: Is the tower printed on all four sides?

A: Yes. The square fabric sleeve wraps around the entire frame, allowing custom branding on all four visible faces.

Q: Can I have different artwork on each side?

A: Yes. You can prepare separate graphics for the four faces within the wraparound design template.

Q: Can I use this tower in a 10x10 trade show booth?

A: It depends on the event's height and placement restrictions. The 8ft models may be suitable in approved positions, while 10ft models often require additional permission or a different booth configuration. The tower must remain within your allocated floor space.

Q: Which is better: a 3ft or 4ft tower?

A: Choose 3ft when floor space is limited or your artwork is simple. Choose 4ft for larger graphics and messaging that needs more room on each side.

Q: Is LED lighting included in every package?

A: No. LED backlighting is an optional upgrade. Select the illuminated configuration if you want the internal lighting system.

Q: Does the LED version need electricity?

A: Yes. The LED system operates through a supplied 24V DC adapter and requires an appropriate power source.

Q: Does the LED version use more electricity in the 10ft height?

A: The supplied specifications list a 180W LED system for all four models. The lighting arrangement and resulting illumination on the taller versions should be confirmed before ordering.

Q: How difficult is the tower to assemble?

A: The aluminum frame uses labeled tubes with push-button connectors. After assembling the frame, slide the fabric over it and secure the bottom zipper. Having a second person assist is recommended for the taller versions.

Q: Can the fabric graphic be replaced later?

A: Yes. Replacement graphics can be produced for a compatible frame. Use the correct artwork template because the graphic dimensions vary by tower size.

Q: Is this suitable for outdoor use?

A: Indoor use is recommended. The tall, four-sided structure can be exposed to significant wind loads, and the supplied specifications do not establish weather resistance for the complete LED system.

Q: Can PrintDrill help with artwork for all four sides?

A: Yes. PrintDrill offers free design assistance. Send your logo, preferred messages, selected tower size, and design requirements to hello@printdrill.com.

Page title

Our Products in Action.
Kudos to our amazing Customers 💙

Collapsible content

How to Order?

Explore the most convenient way to order Signage and Print products online.

Step 1: Customize Your Product

Choose from material types, sizes, finishing options,etc. If Unsure? Our pre-selected options work for most needs, but feel free to adjust based on your preferences.

Step 2: Graphic Design Options

Upload your own design, use our templates, or let our designers create something for you based on your instructions.

Step 3: Upload Files Later (Optional)

If your design isn't ready, no worries! You can place your order now and upload the design later.

Step 4: Proofing & Approval

We provide free proofing to ensure everything looks perfect. You'll approve the final proof before production starts.

Product Specifications

Question & Answers

FAQs for 3D Popup Tower Display

Collapsible content

More info on 3D Popup Tower Display